Our thin film solar panels feature an exceptional efficiency and stability. The temperature coefficient of the cadmium telluride thin film module is low, ensuring the solar panel operates reliably, even under high temperatures. The efficiency under low sunlight conditions is also better than that of a crystalline silicon solar cell. This thin-film module has no intrinsic light induced attenuation effects and will generate electricity with an exceptional stability. The chances of hot spot effects are exceptionally low, thus preventing overheating. The design highlights a color balance, making it suitable for buildings with strict aesthetic requirements.
Mechanical Parameters | |
Length | 1200mm |
Width | 600mm |
Weight | 12.3kg |
Thickness | 6.8mm |
Area | 0.72m2 |
Individual leadwire | 1.5mm2 |
Connectors | MC4/MC4 equivalent |
Junction Box | IP68 |
Cell type | Thin film |
Front glass | Extra clear tempered glass, 3.2mm |
Back glass | Tempered glass 3.2mm |
Encapsulation | PVB |
Load rating | Static: 5400Pa Wind: 2400Pa |
Nominal values | 54 | 72 | 81 | |
Nominal power (-0/+5W) | PMPP (W) | 54 | 72 | 81 |
Voltage at Pmax | VMPP (V) | 96.1 | 96.1 | 96.1 |
Current at Pmax | IMPP (A) | 0.56 | 0.75 | 0.85 |
Open circuit voltage | VOC (V) | 122.1 | 122.1 | 122.1 |
Short circuit current | ISC (A) | 0.64 | 0.85 | 0.96 |
Module efficiency | % | 7.5 | 10.0 | 11.3 |
Operation temperature | ℃ | -40~+85 | -40~+85 | -40~+85 |
Maximum system voltage | VSYS (V) | 1000 | 1000 | 1000 |
Maximum series fuse | ICF (A) | 2A | 2A | 2A |